January 12, 2021 at 5:48 pm #2677emileeboone444Participant
If you are also facing any issue such as Epson error code 97 then you need to find out the cause behind it first then you can easily make it resolve in few simple steps.
The Epson 0x97 error code is a type of warning whenever you encounter an internal hardware issue with your printer. It generally happens due to motherboard malfunction or some other kind of internal component malfunction.
However, if you want to learn about how to fix this issue by following then you can follow our blog.February 10, 2021 at 1:08 pm #2742markwilson2813Participant
Disconnect Everything from the Printer
Before you proceed, you need to cancel any print task and take out all paper jams from your printer. This method is relatively easy and may work for you, depending on the cause of the error. After removing all paper jams, disconnect every cable connected to the printer. They include USB cords, cable wires, and power cords, as well as ink cartridges.
Press and hold the printer’s Power button for 1 minute. Then, plug back everything, including reinstalling the Epson ink cartridges into their respective slots. Push the Power button and turn on your printer then conduct a test print. Find out if there are any changes. If the Epson 0x97 persists or if it returned after a few pages of printing, proceed to troubleshoot method 2.
Reset your Printer
This troubleshooting technique is virtually similar to the first one. You have to disconnect all your printer’s cables. Allow your printer to rest for about five minutes before you proceed. Then, press and hold the Power button for 1 minute. Continue pressing and holding the Power button while you reconnect every cable back. You may need another person’s help with this method.
Press and hold the Power button once more for 1 minute and then release. Conduct a test print to find out if there are any improvements. If the Epson printer error code 0x97 still lingers, then the last method may be the solution.
Clean the Print Head
There are times when a dirty and clogged printhead is the culprit behind an Epson 0x97 error. If this is the case, the solution would be to clean the printhead thoroughly. Here are the steps in cleaning an Epson printer’s printhead:
Step 1 – Remove each ink cartridge one by one from the printhead. Place the ink cartridges (in inverted position) on top of a clean paper or towel. Then, carefully remove the printhead from the printer.
Step 2 – Wipe the bottom of the printhead thoroughly using a clean, lint-free cloth damped in warm water. Keep on cleaning the nozzle area until there’s no more black ink sticking on the fabric.
Step 3 – Soak the printhead in a bowl with warm water for 10 minutes. Do not use boiled water. Put a clean paper towel at the base and let the printhead rest above it while soaking. Take out the printhead from the bowl, and carefully wipe off any water and moisture using a dry lint-free cloth.
Step 4 – Place the printhead on top of a paper towel and allow it to air-dry for 15 minutes. Then, insert the printhead back into the carriage and reinstall all the cartridges into their respective slots. Turn on your printer and see if there are any changes.
I hope these different techniques will be helpful to resolve your issues.
You must be logged in to reply to this topic.